Installation Method Of PVC Wall Panels

1. Preparation: Before installation, it is necessary to clean the wall thoroughly to ensure that it is flat and free of any unevenness.

2. Measurement of dimensions: Use tools such as a tape measure to measure the size of the wall and determine the installation range of PVC wall panels.

3. Cutting PVC wall panels: Based on the measured dimensions, use a saw or cutting machine to cut the PVC wall panels into appropriate lengths.

4. Install U-shaped keel: Install U-shaped keel on the wall, and the position of the U-shaped keel should correspond to the slot of the PVC wall panel.

5. Install PVC wall panel: Insert the cut PVC wall panel below the U-shaped keel, and then push its top into the slot of the U-shaped keel.

6. Fixed PVC wall panel: Use nails or glue to fix the PVC wall panel to the U-shaped keel, ensuring its firmness.

7. Joint treatment: If there are multiple PVC wall panels connected, sealant can be used to seal the joints to maintain the cleanliness of the wall.

8. Decorative corners: PVC wall panel specific decorative strips can be used at the corners and edges to enhance overall aesthetics.